PDF Печать E-mail

DOI: https://doi.org/10.15407/techned2019.06.043

MODELING OF ELECTROMECHANICAL PROCESSES OF THE LINEAR PERMANENT MAGNET ACTUATOR FOR TWO MASS VIBRO-IMPACT SYSTEM

Journal Tekhnichna elektrodynamika
Publisher Institute of Electrodynamics National Academy of Sciences of Ukraine
ISSN 1607-7970 (print), 2218-1903 (online)
Issue No 6, 2019 (November/December)
Pages 43 - 48

Authors
R.P. Bondar*, G.M. Golenkov**
Kyiv National University of Construction and Architecture,
pr. Povitroflotskyi, 31, Kyiv, 03037, Ukraine,
e-mail: Этот e-mail адрес защищен от спам-ботов, для его просмотра у Вас должен быть включен Javascript
* ORCID ID : http://orcid.org/0000-0002-0198-5548
** ORCID ID : http://orcid.org/0000-0002-7016-417X

Abstract

The paper presents a model for study of electromechanical processes in the linear permanent magnet actuator for two-mass vibro-impact system. The model is grounded on an equivalent circuit with the lumped parameters and takes account the dependence of electric parameters from an operating frequency. The model also considers magnetic losses in the actuator core. We applied the Hertz’s formula for modeling of an impact force. Furthermore, we calculated the characteristics of two-mass electromechanical system in dependence of the impact parameters and operating frequency. Besides that, for the validation of the model, we did the comparative calculation of electromechanical characteristics of the linear permanent magnet actuator and experimental investigations for the same system parameters. There is good agreement of the experimental results with the developed model. References 7, figures 4, table 1.

Key words: electromechanical characteristics, linear permanent magnet actuator, vibro-impact system.

Received: 19.04.2019
Accepted: 23.04.2019
Published: 25.10.2019

 

References
1. Oprea R.A., Mihailescu M., Chirila A.I., Deaconu I.D. Design and efficiency of linear electromagnetic shock absorbers. 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM), Brasov. 2012. Pp. 630-634. DOI: https://doi.org/10.1109/OPTIM.2012.6231813
2. Wang J., Wang W., Atallah K., Howe D. Design of a linear permanent magnet motor for active vehicle suspension. IEEE International Electric Machines and Drives Conference, Miami, FL. 2009. Pp. 585-591. DOI: https://doi.org/10.1109/IEMDC.2009.5075265
3. Bondar R.P., Golenkov G.M., Lytvun A. Yu., Podoltsev A.D. Modelling of power characteristics of the vibrator with a linear electric drive. Elektromekhanichni i enerhozberihaiuchi systemy. 2013. No 2. Pp. 66-74. (Ukr)
4. Bondar R.P. Research of the magnetoelectric linear oscillatory motor characteristics during the work on elastoviscous loading. Electrical engineering & electromechanics. 2019. No 1. Pp. 9-16. (Ukr) DOI: https://doi.org/10.20998/2074-272X.2019.1.02
5. Bondar R.P., Podoltsev A.D. Complex model with frequency dependent parameters for electrodynamic shaker characteristics. Tekhnichna Elektrodynamika. 2017. No 1. Pp. 44-51. (Ukr) DOI: https://doi.org/10.15407/techned2017.01.044
6. Bazhenov V.A., Pogorelova O.S., Postnikova T.G., Goncharenko S.N. Comparative analysis of modeling methods for studying contact interaction in vibroimpact systems. Strength of Materials. 2009. Vol. 41. No 4. Pp. 392-398. DOI: https://doi.org/10.1007/s11223-009-9143-2
7. Goldsmith W. Impact. The theory and physical behavior of colliding solids. Moskva: Stroyizdat, 1965. 448 p. (Rus)

PDF