DOI: https://doi.org/10.15407/techned2016.02.055

CONTROL OF AXIAL FLUX PERMANENT GENERATOR

Authors
V.V. Chumack, E.A. Monakhov
V.V. Chumack, E.A. Monakhov National Technical University of Ukraine "Kiev Polytechnic Institute",
pr. Peremohy, 37, Kyiv, 03056, Ukraine,
e-mail: Этот e-mail адрес защищен от спам-ботов, для его просмотра у Вас должен быть включен Javascript

Abstract

Article deals with an special proposed axial flux permanent magnet generator designed for a control of magnetic flux and consequently external characteristic of generator, Proposed design was investigated by three - dimensional field mathematical model in modern programs. Axial flux permanent magnet machine was manufactured and tested after results of research. Experimental results proved the results of modeling. Also an electric scheme for control of output voltage based on Arduino Uno was designed and investigated. The scheme implements pulse - width modulation of control voltage. References 6, figures 5.

Key words: permanent magnet generator, axial flux, control.

Received:    28.10.2015
Accepted:    27.01.2016
Published:  18.03.2016

References

1. But D.A. Brushless electrical machines.  Moskva: Vysshaia shkola, 1990.  416 p. (Rus)
2. Monakhov E.A., Chumack V.V. Calculation of magnetic circuit of axial flux permanent magnet generator. Visnyk Kremenchutskoho Natsionalnoho Universytetu im. Mykhaila Ostrohradskoho.  2015.  №1(90).  Vol. 1.  P. 23–26. (Rus)
3. Monakhov E.A., Chumack V.V. Simulation control of axial-flux permanent magnet generator. Visnyk Natsionalnoho Tekhnichnoho Universytetu "Kharkivskyi Polytekhnichnyi Instytut".  2015.  №42(1151).  P. 39–43. (Rus)
4. Palastin L.M. Synchronous machines of autonomous sources of.  Moskva: Energiia, 1980.  384 p. (Rus)
5. Gieras J.F., Wing M., Kamper M.J. Axial flux permanent magnet brushless machines.  Dordrecht; Boston; London: Kluwer Academic Publishers, 2004.  340 p.
6. Sadeghierad M.H., Lesani H., Monsef. H, Darabi A. Air gap optimization of high-speed axial - flux pm generator. Journal of Applied Sciences. 2000.  Vol. 9.  P. 1915–1921. DOI: https://doi.org/10.3923/jas.2009.1915.1921

PDF