ЭЛЕКТРОМАГНИТНО-АКУСТИЧЕСКИЙ ПРЕОБРАЗОВАТЕЛЬ ДЛЯ УЛЬТРАЗВУКОВОЙ ТОЛЩИНОМЕТРИИ ФЕРРОМАГНИТНЫХ МЕТАЛЛОИЗДЕЛИЙ БЕЗ УДАЛЕНИЯ ДИЭЛЕКТРИЧЕСКОГО ПОКРЫТИЯ

R.P.  Migushchenko; G.M. Suchkov; H.K. Radev; O.M.  Petrishchev; O.V.  Desyatnichenko

doi:10.15407/techned2016.02.078

No. 2 (2016), Information Measuring Systems in Electric Power Engineering

No. 2 (2016)

Information Measuring Systems in Electric Power Engineering

ELECTROMAGNETIC ACOUSTIC TRANSDUCER FOR ULTRASONIC THICKNESS GAUGING OF FERROMAGNETIC METAL ITEMS WITHOUT REMOVING DIELECTRIC COATING

Published 2016-03-18

https://doi.org/10.15407/techned2016.02.078

R.P. Migushchenko⁺⁻
G.M. Suchkov⁺⁻
H.K. Radev⁺⁻
O.M. Petrishchev⁺⁻
O.V. Desyatnichenko⁺⁻

R.P. Migushchenko

National Technical University “Kharkiv Polytechnic Institute”, 2, Kirpichova str., Kharkiv, 61002, Ukraine

G.M. Suchkov

National Technical University «Kharkiv Polytechnic Institute», Kyrpychova st., 2, Kharkiv, 61002, Ukraine

H.K. Radev

Technical University of Sofia, 1000, 8 Kl. Ohridski Blvd, Sofia, 1797, Bulgaria

O.M. Petrishchev

National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute» Peremohy аve., 37, Kyiv, 03056, Ukraine

O.V. Desyatnichenko

National Technical University «Kharkiv Polytechnic Institute», Kyrpychova st., 2, Kharkiv, 61002, Ukraine

ARTICLE_13_PDF (Українська)

Keywords

ultrasonic diagnosis
electromagnetic acoustic transducer
dielectric coating
thickness gauging ультразвуковая диагностика
электромагнитно-акустический преобразователь
диэлектрическое покрытие
толщинометрия

How to Cite

[1]

Мигущенко, Р., Сучков, Г., Радев, Х., Петрищев, О. and Десятниченко, А. 2016. ELECTROMAGNETIC ACOUSTIC TRANSDUCER FOR ULTRASONIC THICKNESS GAUGING OF FERROMAGNETIC METAL ITEMS WITHOUT REMOVING DIELECTRIC COATING. Tekhnichna Elektrodynamika. 2 (Mar. 2016), 078. DOI:https://doi.org/10.15407/techned2016.02.078.

Abstract

A combined high-performance electromagnetic acoustic gauge for transforming electrical power into acoustic power and vice versa has been developed. It is designed to excite and accept ultrasonic high-frequency pulses in metallic items by using magnetic and electromagnetic fields in the presence of dielectric coatings with thickness up to 10 mm. Without changing the design this transducer can be used for checking items with flat or curved surfaces. At this only thickness of metal is measured. The new transducer allows significantly reduce cost of ultrasonic check by means of excluding operations for removal of protecting coating and its further renewal. The solution can be used for diagnostic operations in field of power engineering, metallurgy, transportation and other areas in which metal items with/without coatings are used. References 7, figures 5.

https://doi.org/10.15407/techned2016.02.078

ARTICLE_13_PDF (Українська)

References

Vasenev Yu.G., Stupachenko S.G. Methods improve the monitoring gas and oil pipelines using the technical capabilities of defectoscopes SONATEST // Kontrol. Diagnostika. – 2009. – No 5. – Pp. 50–54. (Rus)

Ermolov I.N., Lange Ju.V. Nondestructive testing. Vol. 3. – Moskva: Mashinostroenie, 2004. – 864 p. (Rus)

Izymov N.M., Linde D.P. Fundamentals of radio engineering. – Moskva: Radio i sviaz. – 1983. – 376 p. (Rus)

Sudakova K.V., Kazjukevich I.L. On increasing the effectiveness of the quality control of steel products // V mire nerazrushaiushchego kontrolia. – 2004. – Vol. 3. – Pp. 8–10. (Rus)

Suchkov G.M., Petrishchev O.N., Homyak Yu.V. Theory and practice of electromagnetic-acoustic control. Part 3. – Kharkiv: Shchedra sadyba plius, 2015. – 124 p. (Rus)

Maeda M., Hirasawa H., Yoshikava T. The effects of film thickness on the reflection echo height of ultrasonic testing // J. Jap. Soc. Nondestructive Inspection. – 2012. – Vol. 61. – No 9. – Pp. 480–487.

Suchkov G.M., Petrishchev O.N., Cherednichenko I.V., Fedorov V.V., Desyatnichenko A.V., Khashchina S.V., Maslova M.S. Generator of Probing Pulses for EMA Flaw Detectors // Russian Journal of Nondestructive Testing. – 2012. – Vol. 48. – No 9. – Pp. 537–540.