Keywords
current
pulse
high voltage
power
nanocarbon synthesis
productivity електророзряд
струм
імпульс
висока напруга
потужність
синтез нановуглецю
продуктивність
How to Cite
Abstract
The influence of electrical parameters of high-voltage electric-discharge systems (EDS) for synthesis of nanocarbon on their performance and specific power inputs was experimentally studied. The regularities of influence of electrical and technological characteristics of EDS on synthesis efficiency of nanocarbon materials (NCM) in gaseous carbonic mediums at limited power inputs are determined. References 12, figures 2.
References
Bohuslavskyy L.Z., Vinnychenko D.V., Nazarova N.S. High voltage installation for the synthesis of nanocarbon with onion-like structure with the control system of electrical characteristics of gas discharge // Visnyk NTU "KhPI". – 2015. – No 20 (1129). – Pp. 11–23. (Ukr)
Vinnychenko D.V. Determination of the optimal characteristics of high voltage electric-discharge system for implementing electropulse synthesis technology of nanocarbon // Tekhnichna Elektrodynamika. – 2014. – No 4. – Pp. 129–131. (Ukr)
Vinnychenko D.V., Nazarova N.S. Development of principles of management regime parameters of electrical systems for the electric-discharge synthesis of carbon nanomaterials // Visnyk NTU "KhPI". – 2015. – No 12(1121). – Pp. 292–297. (Ukr)
Vovchenko A.I., Tertilov R.V. Synthesis of capacitive nonlinear-parametrical energy sources for discharge-pulse technologies // Zbirnyk Naukovykh Prats Natsionalnoho Universytetu Korablebuduvannia. – 2010. – No 4. – Pp. 118–124. (Rus)
Zolotarenko An.D., Zolotarenko Al.D., Shchur D.V., Zahynaichenko S.Ju., Dubovoj A.H. By the processes of carbon nanostructures formation in the liquid phase // Trudy konferentsii ICHMS’2009. – 2009. – Pp. 404–405. (Rus)
Kuskova N.Yu., Petrychenko S.V., Tsolyn P.L., Baklar V.Yu. Dependence of carbon nanomaterials on the molecular structure of organic liquids in the process of discharge machining // Elektronnaia Obrabotka Materialov. – 2013. – Vol. 49. – No 1. – Pp. 14–19. (Rus)
Suprunovska N.I., Shcherba A.A. Processes of energy redistribution between parallel connected capacitors // Tekhnichna Elektrodynamika. – 2015. – No 4. – Pp. 3–11. (Rus)
Shcherba A.A., Suprunovska N.I., Synytsyn V.K., Ivashchenko D.C. Aperiodic and oscillatory processes of capacitor discharge at forced limitation of duration // Tekhnichna Elektrodynamika. – 2012. – No 3. – Pp. 9–10. (Rus)
Berkowitz A.E., Walter J.L. Sparc erosion: A method for producing rapidly quenched fine powders // J. of Mater. Res. – March/April, 1987. – No 2 (2). – Pp. 277–288.
Ivanova O.M., Danylenko M.I., Monastyrskyy G.E., Kolomytsev V.I., Koval Y.M., Shcherba A.A., Zaharchenko S.M., Portier R. Investigation of the formation mechanisms for Ti-Ni-Zr-Cu nanopowders fabricated by electrospark Erosion method in cryogenic liquids // Metallofizika i Noveishie Tekhnologii. – 2009. – T. 31. – No 5. – Pp. 603–614.
Shcherba A.A., Kosenkov V.M., Bychkov V.M. Mathematical closed model of electric and magnetic fields in the discharge chamber of an Electrohydraulic installation // Surface engineering and applied electrochemistry. – 2015. – Vol. 51. – No 6. – Рp. 581–588.
Shcherba A.A., Suprunovska N.I. Study features оf transients in the circuits of semiconductor discharge pulses generators with nonlinear electro-Spark load // IEEE International Conference on Intelligent Energy and Power Systems, IEPS 2014 – Conference Proceedings. – 2014. – Pp. 50–54.
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright (c) 2022 Array