Keywords
inductive-capacitive circuit
series resonance
high frequency
Q factor
light center
charge
voltage
discharge
electrical system змінний струм
індуктивно-ємнісний контур
послідовний резонанс
висока частота
добротність
літцендрат
заряд
напруга
розряд
електротехнічна система
How to Cite
Abstract
A new scientific concept has been developed for the creation of high-voltage electro-technical systems (ETS) of a resonant type based on the implementation in them of series high-quality inductive-capacitive circuits (ICC) and high-frequency (HF) resonant currents. This makes it possible to repeatedly increase the alternating voltage on the reactive elements of the ICC and on the load connected in parallel to one of the elements, and to ensure a significant decrease in the impulse energy of the ETS without changing their average power, as well as to increase the speed of control and parametric stabilization of the load modes of the ETS even with a rapid decrease in the electrical resistance of this load to almost zero, as in the case of electrical breakdown of its insulation. The generation of resonant currents with a frequency of up to 40 kHz in the ICC, which has a coil with an inductance of ~ 25 mH and a Q factor up to 270 (made of multi-core twisted copper wires of the " litzendraht " type) and a ceramic capacitor with a capacity of ~ 3.5 nF and a Q factor > 1000, ensures the realization of the QICC up to 260 and the corresponding increase in the ratio of the ETS output voltage to the input voltage without the use of step-up transformers. When connecting such an ETS to a source of alternating voltage of 220 V, a voltage of up to 40 kV can be generated at the output of the ETS. A significant increase in the frequency of currents leads to a significant decrease in the mass-dimensional characteristics of ETS and the possibility of creating their samples mobile (weighing up to 5 kg), and if necessary, autonomous, in particular with power supply from batteries. The new scientific concept is aimed at creating a resonance-type ETS for safe and reliable monitoring and diagnostics of the technical condition of high-voltage insulation of power cables, powerful electric machines and other energy objects of the critical infrastructure of Ukraine. Such ETS can also be effectively used for charging to high voltages capacitive energy storage (CES) in technological installations for the production of electro-spark micro- and nano-powders with unique properties, as well as for high-voltage electro-hydro-pulse processing of various materials and environments. It has been established that the power of these ETS increases with a decrease in the ratio of the capacitances of the capacitors ICC and CES. References 40, figures 4.
References
Zolotarev V.M., Shcherba М.А., Gurin А.G., Suprunovska N.I., Chopov Ye.Yu., Obozny А.L. Electrotechnologi-cal complex for the production of cable systems for voltages up to 400 kV. Kyiv: Pro format, 2017. 594 p. (Rus)
Design of cable lines with a voltage of up to 330 kV. Standard (with changes). SOU-N MEV 40. 1-37471933-49:2011. Kyiv: SE NEC Ukrenergo, 2017. 139 p. (Ukr)
Kubyshyn B.Ye., Milyah А.N. Inductive-capacitive devices for current stabilization. Avtomatyka i telemekhanika. 1959. Vol. XX. No 5. Pp. 663-668. (Rus)
Milyah А.N., Kubyshyn B.Ye., Volkov I.V. Inductive-capacitive converters of voltage sources to current sources. Kyiv: Naukova dumka, 1964. 304 p. (Rus)
Milyah А.N., Volkov I.V. Unchangeable current systems based on inductive-capacitive converters. Kyiv: Naukova dumka, 1974. 216 p. (Rus)
Milyah А.N., Kubyshyn B.Ye., Hrenov K.K., Esibian E.М., Volkov I.V. A device for feeding a welding arc with current. USSR Author's Certificate No 146421. Bulletin. 1962. No. 8. (Rus)
Milyah А.N., Volkov I.V. Slobodian L.R. DC Drive Speed Control Using Inductive-Capacitive Converters. DAN USSR. 1967. No 7. Pp. 23–28. (Rus)
Milyah А.N., Kubyshyn B.Ye., Volkov I.V. Battery charging device. USSR Author's Certificate No 156986. Bul-letin. 1963. No 17. (Rus)
Milyah А.N., Kubyshyn B.Ye., Volkov I.V. Device for charging the storage capacitor of a high-power pulse gen-erator. USSR Author's Certificate No. 169564. Bulletin. 1965. No 7. (Rus)
Volkov I.V., Lipkovsky K.А., Zakrevsky S.I. Inductive-capacitive converters when powered by non-sinusoidal voltage. Converter technology devices. Kyiv: Naukova dumka, 1969. (Rus)
Zakrevskii S.I. Development and research of autonomous sources of stabilized current based on inductive-capacitive converters. Ph.D. tech. sci. diss. Kiev. 1971. 244 p. (Rus)
Volkov I.V., Gubarevich V.N., Isakov V.N., Kaban V.P. Principles of construction and optimization of induc-tive-capacitive converter circuits. Kyiv: Naukova dumka, 1981. 176 р. (Rus)
Livshits A.L., Otto M.S. Pulse electrical engineering. Moskva: Energoatomizdat, 1983. 352 p. (Rus)
Popilov L.Ya. Electrophysical and electrochemical processing of materials. Moskva: Mashinostroenie, 1982. 400 p. (Rus)
Pentegov I.V. Fundamentals of the theory of charging circuits of capacitive energy storage devices. Kyiv: Naukova Dumka, 1982. 422 p. (Rus)
Bluhm H. Pulsed power systems: principles and applications. Berlin: Springer-Verlag, 2006. Pp. 288–305.
Shcherba А.А., Ivashchenko D. S., Suprunovska N.I. Development of difference equations method for analysis of transient processes in the circuits of electro-discharge systems at stochastic changing of load resistance. Tekhnichna Elektrodynamika. 2013. No 3. Pp. 3–11. (Rus)
Ochin P., Gilchuk A.V., Monastyrsky G.E., Koval Y., Shcherba A.A., Zaharchenko S.N. Martensitic Transfor-mation in Spark Plasma Sintered Compacts of Ni-Mn-Ga Powders Prepared by Spark Erosion Method in Cryogenic Liquids. Materials Science Forum. 2013. Vol. 738-739. Pp. 451-455. DOI: https://doi.org/10.4028/www.scientific.net/MSF.738-739.451 .
Nguyen P.K., Sugho J., Berkowitz A.E. MnBi particles with high energy density made by spark erosion. J. Appl. Phys. 2014. Vol. 115. Iss. 17. Pp. 17A756-1. DOI: https://doi.org/1.4868330 .
Suprunovska N.I., Shcherba А.А. Processes of energy redistribution between parallel connected capacitors. Tekhnichna Elektrodynamika. 2015. No 4. Pp. 3–11. (Rus)
Shcherba A.A., Suprunovska N.I. Electric energy loss at energy exchange between capacitors as function of their ini-tial voltages and capacitances ratio. Tekhnichna Elektrodynamika. 2016. No 3. Pp. 9–11. DOI: https://doi.org/10.15407/techned2016.03.009 .
Vinnychenko D.V. The influence of electrical parameters of high-voltage electric discharge units for the synthesis of nanocarbon on their productivity and specific energy consumption. Tekhnichna Elektrodynamika. 2016. No 4. Pp. 95–97. DOI: https://doi.org/10.15407/techned2016.04.095 . (Ukr)
Vinnychenko D., Nazarova N., Vinnychenko I. Transformerless high-voltage resonant charging systems for ca-pacitive energy storage devices for electro-discharge technologies. 41st International Conference on Electronics and Nanotechnology (ELNANO). Lviv, Ukraine, 10-14 October 2022. Pp. 727-731. DOI: https://doi.org/10.1109/ELNANO54667.2022.9927052 .
Vinnychenko D.V., Nazarova N.S., Vinnychenko I.L. Research of characteristics of high voltage transformerless resonant charger of capacitary storage device. Tekhnichna Elektrodynamika. 2023. No 2. Pp. 17–21. DOI: https://doi.org/10.15407/techned2023.02.021 . (Ukr)
Sizonenko O.N., Grigoryev E.G., Zaichenko A.D., Pristash N.S., Torpakov A.S., Lipyan Y.V., Kovalenko A.A. Plasma methods of obtainment of multifunctional composite materials, dispersion-hardened by nanoparticles. IOP Con-ference Series: Materials Science and Engineering. 2016. Vol. 130(1). DOI: https://doi.org/10.1088/1757-899X/130/1/012048 .
Densley J. Ageing mechanisms and diagnostics for power cables – An overview. IEEE Electrical Insulation Magazine. Jan. 2001. Vol. 17. No 1. Pp. 14–22.
Hartlein R. Diagnostic testing of underground cable systems (cable diagnostic focused initiative). NEETRAC, Atlanta, GA, USA, Tech. Rep. DOE DE-FC02-04CH11237, NEETRAC 04-211/04-212/09-166, 2010.
Shahsavarian T., Shahrtash S.M. Modelling of aged cavities for partial discharge in power cable insulation. IET Sciences, Measurement and Technology. Sep. 2015. Vol. 9. No 6. Pp. 661–670. DOI: https://doi.org/10.1049/iet-smt.2014.0222 .
Eigner A., Rethmeier K. An overview on the current status of partial discharge measurements on AC high volt-age cable accessories. IEEE Electrical Insulation Magazine. Mar. 2016. Vol. 32. No 2. Pp. 48–55. DOI: https://doi.org/10.1109/MEI.2016.7414231.
Tavner P., Ran L., Penman J., Sedding H. Condition monitoring of rotating electrical machines. Institution of Engineering and Technology: 2nd Revised edition, 2008. 304 p. DOI: https://doi.org/10.1049/PBPO056E.
Zozulin Y.V., Antonov O.E., Bychik V.M., Borychevskyi A.M., Kobzar K.O., Livshits O.L., Rakogon V.G., Rogovy I.X., Khaymovich L.L., Cherednyk V.I. Creation of new types and modernization of existing turbine generators for thermal power stations. Kharkiv: PF Kolegium, 2011. 228 p. (Ukr)
Danikas M.G., Sarathi R. Electrical machine insulation: Traditional insulating material, nanocomposite polymers and the question of electrical trees. Funktechnikplus J. 2014. Vol. 1. Pр. 7-32.
Titko A.I., Vaskovsky Yu.N. Scientific foundations, methods and diagnostic tools for asynchronous motors. Kyiv: Institute of Electrodynamics of the National Academy of Sciences of Ukraine, 2015. 300 p. (Rus)
Kazanivsky M. Lazer power supply based on multiphase resonance converters. International Conference on Modern Problems of Radio Engineering, Telecommunications and Computer Science (TCSET). Lviv, Ukraine, 23-27 February 2010. Pp. 115-115.
Montes O.A., Son S., Kim S., Seok H., Lee J.S., Kim M. Forward-flyback resonant converter for high-efficient medium-power photovoltaic applications. IEEE Applied Power Electronics Conference and Exposition (APEC). Tampa, FL, USA, 26-30 March 2017. Pp. 1223-1228. DOI: https://doi.org/10.1109/APEC.2017.7930851
Vovchenko A.I., Boguslavsky L.Z., Miroshnichenko L.N. Trends in the development of high-power high-voltage pulse current generators at the Institute of IPPT of NAS of Ukraine. Tekhnichna Elektrodynamika. 2010. No 5. Pp. 69-74 (Rus)
Warren V.G. Partial discharge testing: a progress report stator winding insulation thermal class. Iris Power, 2015.
Xu S., Shen W., Qian Q., Zhu J., Sun W., Li H. An efficiency optimization method for a high frequency quasi-ZVS controlled resonant flyback converter. IEEE Applied Power Electronics Conference and Exposition (APEC). Ana-heim, CA, USA, 17-21 March 2019. Pp. 2957-2961. DOI: https://doi.org/10.1109/APEC.2019.8722026
Nakao K., Ishida H., Nakao N., Kimura N. Application and verification of an electromagnetic field resonance type wireless power transfer method to mixing blade heated by induction heating. 19th International Conference on Electrical Drives and Power Electronics (EDPE). Dubrovnik, Croatia, 04-06 October 2017. Pp. 159-164, DOI: https://doiu.org/10.1109/EDPE.2017.8123273.
Kalantarov P.L., Tseytlin L.A. Calculation of inductances. Leningrad: Energoatomizdat, 1986. 488 p. (Rus)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright (c) 2024 Tekhnichna Elektrodynamika