МЕТОДИКА ВИЗНАЧЕННЯ МІЖПОВІРОЧНОГО ІНТЕРВАЛУ ЗАСОБІВ ВИМІРЮВАННЯ НА ОСНОВІ КОНЦЕПЦІЇ НЕВИЗНАЧЕНОСТІ
ARTICLE_12_PDF

Ключові слова

metrological certification
calibration interval
uncertainty of measurement
torque
measuring instruments
precision class метрологічна атестація
міжповірочний інтервал
невизначеність вимірювання
крутильний момент
засоби вимірювання
клас точності

Як цитувати

[1]
Васілевський, О. 2014. МЕТОДИКА ВИЗНАЧЕННЯ МІЖПОВІРОЧНОГО ІНТЕРВАЛУ ЗАСОБІВ ВИМІРЮВАННЯ НА ОСНОВІ КОНЦЕПЦІЇ НЕВИЗНАЧЕНОСТІ. ТЕХНІЧНА ЕЛЕКТРОДИНАМІКА. 6 (Лис 2014), 081.

Анотація

Запропоновано методику визначення міжповірочного інтервалу засобів вимірювання, яка базується на використанні концепції невизначеності вимірювання для опрацювання експериментальних даних під час метрологічної атестації. Наведено результати апробації методики для визначення міжповірочного інтервалу засобу вимірювання крутильного моменту електродвигунів. Бібл. 15, табл. 3.

ARTICLE_12_PDF

Посилання

RMG 74-2004 GSI. Methods for determination of recalibration and calibration intervals of measuring instruments. – Moskva: Standartinform, 2005. (Rus)

Matveevskyi V.R. Reliability of technical controls. – Moskva: MGIEM, 1993. – 92 p. (Rus)

Yakovlev M.Yu. Ensuring of metrological reliability of measuring instruments aviation radio systems during operation // Zbirnyk naukovykh prats Kharkivskoho universytetu Povitrianykh Syl. – 2007. – Vypusk 3 (15). – Pp. 136 – 141. (Ukr)

Vasilevskyi O.M. Rationing of metrological reliability parameters // Visnyk Vinnytskoho politekhnichnoho instytutu. – 2011. – № 4. – Pp. 9 – 13. (Ukr)

Yakovlev M.Yu. Assessment of metrological metrological characteristics of instability in determining the initial inter-verification interval measuring instruments aircraft radio systems // Radioelektronni i kompiuterni systemy. – 2008. – № 2(29). – Pp. 40–44. (Ukr)

ISO/IEC Guide 98-1:2009 «Uncertainty of measurement – Part 1: Introduction to the expression of uncertainty in measurement». – Geneva (Switzerland): ISO. – 2009. – 32 p.

IEC GUIDE 115-2007 «Application of uncertainty of measurement to conformity assessment activities in the electrotechnical sector». – Geneva (Switzerland): IEC. – 2007. – 54 p.

Dorozhovets M., Warsza Z. Evaluation of the uncertainty type A of autocorrelated measurement observations // Measurement Automation and Monitoring. – 2007. – № 2. – Pp. 20–24. (in Polish)

Vasilevskyi O.M. Evaluation of uncertainty of dynamic measurement // Visnyk Vinnytskoho politekhnichnoho instytutu. – 2011. – № 3. – Pp. 9–13. (Ukr)

Vasilevskyi O.M., Kucheruk V.Yu. Basic theory of uncertainty. – Kherson: Oldi-plius, 2013. – 224 p. (Ukr)

Vasilevskyi O.M., Podzharenko V.O. Actual problems of metrological support. – Vinnytsia: VNTU, 2010. – 214 p. (Ukr)

Vasilevskyi O.M., Podzharenko А.V. Evaluation of the measurement uncertainty of moment of inertia of the rotor in the amplitude of torsional vibrations // Visnyk Vinnytskoho politekhnichnoho instytutu. – 2009. – № 4. – Pp. 5–9. (Ukr)

Vasilevskyi O.M. Advanced mathematical model of measuring the starting torque motors // Tekhnichna Elektrodynamika. – 2013. – № 6. – Pp. 76–81. (Ukr)

Vasilevskyi O.M. Means for measuring the dynamic torque electric motors and an analysis of its accuracy // Vymiriuvalna tekhnika ta metrolohiia. – № 73. – 2012. – Pp. 52–56. (Ukr)

Vasilevskyi O.M. Research efforts as a result of measurement based on the concept of uncertainty // Visnyk inzhenernoi akademii Ukrainy. – 2013. – № 3–4. – Pp. 229–232. (Ukr)

Creative Commons License

Ця робота ліцензується відповідно до Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Авторське право (c) 2023 Array

Переглядів анотації: 8 | Завантажень PDF: 3

Завантаження

Дані завантаження ще не доступні.