Keywords
magnetization
demagnetization
power losses
optimization
experiment асинхронний двигун
намагнічування
розмагнічування
втрати потужності
оптимізація
експеримент
How to Cite
Abstract
Experimental research of the processes of magnetization and demagnetization for the motionless vector-controlled induction motor was performed, according to a linear law with a variation in the duration of these processes. The methodology of research during which the orthogonal components of the stator and rotor currents were recorded in the rotor flux reference frame, the rotor flux module and the energy of the total losses in the stator and rotor copper is described. The main characteristics and parameters of laboratory equipment and facilities are given. From the point of view of minimizing copper losses, the existence of the optimal duration of the investigated transient processes has been experimentally proven. The results of experimental studies with high accuracy coincide with calculations based on previously obtained analytical dependencies, which confirms the admissibility of the assumptions made during theoretical studies. References 10, figures 7, tables 2.
References
Diachenko G.G., Aziukovskyi O.O. Review of methods for energy-efficiency improvement in induction machines. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2020. No 1. Pp. 80-88. DOI: https://doi.org/10.33271/nvngu/2020-1/080.
Borisevich A. Numerical method for power losses minimization of vector-controlled induction motor. International Journal of Power Electronics and Drive System. 2015. Vol. 6. No 3. Pp. 486-497. DOI: https://doi.org/10.11591/ijpeds.v6.i3.pp486-497.
Seena T., Rinu A.K. Efficiency optimization with improved transient performance of indirect vector-controlled induction motor drive. International Journal of advanced research in electrical, electronics and instrumentation engineering. 2013. Vol. 2. Pp. 374-385.
Blanuša B.D., Dokic B.L. Vukosavic S.N. Efficiency optimized control of high performance induction motor drive. Electronics. 2009. Vol. 13. No 2. Pp. 8-13.
Braslavsky I.A., Kostyliev A.V., Stepaniuk D.P. Optimization of Starting Process of the Frequency Controlled Induction Motor. 13th International Power Electronics and Motion Control Conference EPE-PEMC. Poznan, Poland, 01–03 September 2008. Pp. 1050-1053. DOI: https://doi.org/10.1109/EPEPEMC.2008.4635406 .
Tolochko O.I., Rozkaryaka P.I., Chekavskii G.S., Kuzhel A.K. Control of induction motor magnetization and demagnetization processes in field-oriented control systems. Elektromekhanichni ta enerhozberihaiuchі sistemy. 2011. Vol. 3(15). Pp. 79-82. (Rus).
Volkov V.A. Optimization of magnetization and demagnetization modes in frequency-controlled induction motor. Elektrotekhinka and enerhetika. Naukovi pratsi Donetskoho natsionalnoho tekhnichnoho universytetu. 2013. Vol. 2. Pp. 59-66. (Rus).
Tolochko O., Sopiha M. Heat loss minimization field control of motionless induction motors in pause of intermittent duty. IEEE First Ukraine Conference on Electrical and Computer Engineering (UKRCON). Kyiv, Ukraine, 29 May – 02 June 2017. Pp. 442-447. DOI: https://doi.org/10.1109/UKRCON.2017.8100525.
Volkov V.A. Optimization of magnetization and demagnetization times of a stopped frequency-controlled induction motor. Elekrotekhnika i elektroenerhetika. 2018. No 4. Pp. 17-29. DOI: https://doi.org/10.15588/1607-6761-2018-4-2. (Rus).
Tolochko O.I., Kaluhin D.V. Optimization of magnetization and demagnetization processes of the vector-controlled asynchronous motor. Tekhnichna Electrodynamika. 2020. No 4. Pp. 41-45. DOI: https://doi.org/10.15407/techned2020.04.041. (Ukr).
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright (c) 2024 Array