Abstract
The method for a non-linear control of the resonant inverter’s output voltage, which allows to create a low-frequency sinusoidal output voltage using the high-frequency modulation of the resonant pulses, was developed. It assumes the preliminary formation of the switching sequences for the converter’s switches. It was proposed to use the circuit with the switched capacities to change the pulse characteristics while reducing the absolute value of the inverter’s output voltage. The algorithm for the calculation of the switching sequences was proposed. The simulation of the inverter took place. It confirmed the reduction of the output voltage distortions. References 7, figures 3.
References
Brown M. Power supplies. Computation and design. – Kyiv: МK-Press, 2007. – 288 p. (Rus)
Meleshyn V.I. Transistor converter technique. – Moskva: Tekhnosfera, 2005. – 632 p. (Rus)
Pavlov G.V., Obrubov A.V., Vinnichenko I.L. The frequency converter is based on a resonant inverter with nonlinear control // Visnyk NTU "KhPІ". – 2015. – No 12(1121). – Pp. 490-494. (Rus)
Pavlov G.V., Obrubov A.V., Vinnichenko I.L. Electromagnetic processes and parameters of storage elements in the resonant inverter with nonlinear control // Sudostroenie i morskaia infrastruktura. – 2015. – No 2(4). – Pp. 96-107. (Rus)
Pavlov G.V., Obrubov A.V., Nikitina O.V., Pokrovskiy M.V. DC voltage converters based on the resonant inverters: monograph. – Mykolayiv: NUoS, 2013. – 372 p. (Rus)
Rashid M. Power Electronics Handbook. Devices, Circuits, and Applications. – Cambridge: Elsevier Inc., 2007.
Steigerwald R.I. A Comparison of Half-Bridge Resonant Converter Topologies // IEEE APEC. – 1987. – Рp. 135–144.

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright (c) 2022 Array