Анотація
Розглянуто процес формування перехідного значення напруги на комутуючих конденсаторах у колі умовно дванадцятифазного керованого компенсаційного перетворювача (УДККП), що живиться від електричної мережі 6 кВ в режимі послідовного прямого пуску від неї групи потужних асинхронних машин (АМ). Вказуються можливі засоби обмеження перенапруги на комутуючих конденсаторах, з’ясовується найбільш ефективний для реалізації цієї дії набір значень параметрів елементів УДККП. Визначається найбільш ефективний алгоритм управління тиристорами УДККП задля зменшення значення ємності, яка форсує збільшення компенсаційного струму. Досліджуються пускові перехідні режими, які виникають у мережі внаслідок послідовного запуску групи потужних АМ. Бібл. 10, рис. 6.
Посилання
Chyzhenko O.I., Rybina O.B. Conditionally twelve-phase controlled compensation converter for facilitating direct start from the electrical network in series of four 8MW asynchronous machines. Tekhnichna Elektrodynamika. 2024. No 6. Pp. 37–43. DOI: https://doi.org/10.15407/techned2024.06.031. (Ukr)
Chyzhenko I.M. Handbook of Converter Technology. Kyiv: Tekhnika, 1978. 448 p. (Rus)
Hong Hu, Wenmei Wu, Shaohua Xiao, Min Tan, Chuanjia Han. Summary on Reactive Power Compensation Technol-ogy and Application. Proc. of the 2nd International Conference on Intelligent Computing and Cognitive Informatics, Singapore, 8-9 September 2015. DOI: https://doi.org/10.2991/icicci-15.2015.48.
Boiko V.S., Shkardun O.V. Electromagnetic processes in a three-phase bridge compensation converter. Tekhnichna Elektrodynamika. 2023. No 4. Pp. 26–36. DOI: https://doi.org/10.15407/techned2023.04.026.(Ukr)
Boiko V.S., Shkardun O.V. Conditions for recharging the capacitors of the commutating link of the three- phase bridge compensation converter. Tekhnichna Elektrodynamika. 2023. No 3. Pp. 13–21. DOI: https://doi.org/10.15407/techned2023.03.013. (Ukr)
Butkevych O.F., Chyzhenko O.I., Popovych O.M., Trach I.V. An influence of the facts upon an electrical network's mode during direct start-up of an asynchronous machine in the complex load's composition. Tekhnichna Elektrodynamika. 2018. No 6. Pp. 62–68. DOI: https://doi.org/10.15407/techned2018.06.062. (Ukr)
Lesnik V.A., Shurub Yu.V. Account of differential parameters at mathematical simulation of asymmetrical operational modes of asynchronous generators. Tekhnichna Elektrodynamika. 2003. No 1. Pp. 45–48. (Rus)
Popovych O. Mathematical model for studying the modes of induction machines of electromechanotronic systems. Pratsi Instytutu elektrodynamiky Natsionalnoi Academii Nauk Ukrainy. 2010. Vyp. 25. Pp.89–97. (Ukr)
Popovych O.M.,. Golovan І.V Study of starting regimes of induction motors using equivalent parameters of quasi -3D field model. Tekhnichna Elektrodynamika. 2019. No 1. Pp. 34–37. DOI: https://doi.org/10.15407/techned2019.01.034. (Ukr)
Krasnoshapka N.D., Pushkar M.V. Modes of Asynchronous Electric Drives Taking into Account the Resistance of the Line of the Power Supply System. Visnyk Vinnytskoho politekhnichnoho instytutu. 2022. Vyp. 1. Pp. 39–43. DOI: https://doi.org/10.31649/1997-9266-2022-160-1-39-43. (Ukr)

Ця робота ліцензується відповідно до Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Авторське право (c) 2025 ТЕХНІЧНА ЕЛЕКТРОДИНАМІКА

