IMPROVED METHOD FOR CALCULATION OF PARAMETERS OF ELECTROMAGNETIC AND POWER PROCESSES IN ELECTRIC CIRCUITS WITH STEEL IN SATURATION MODE
ARTICLE_2_PDF

Keywords

circuit with steel
electromagnetic processes
power processes
degree of saturation коло зі сталлю
електромагнітні процеси
енергетичні процеси
ступінь насичення

How to Cite

[1]
Zagirnyak, M. et al. 2015. IMPROVED METHOD FOR CALCULATION OF PARAMETERS OF ELECTROMAGNETIC AND POWER PROCESSES IN ELECTRIC CIRCUITS WITH STEEL IN SATURATION MODE . Tekhnichna Elektrodynamika. 4 (Jun. 2015), 012.

Abstract

The reasons for increased degree of saturation of magnetic system of electric machines with a long error-free running time are substantiated. It is proved that application of the conventional methods of calculation of electromagnetic and power processes parameters at practical degrees of saturation results in inadmissible errors. During the process of the problem solution an improved parameter calculation method applicable under the considered conditions is grounded. A sufficient degree of coincidence of the calculation results with the experimental data as to integral parameters and instantaneous power and electromagnetic characteristics is obtained. References 8, table 1, figures 6.

ARTICLE_2_PDF

References

Cathey, Jimmie J. Electric machines: analysis and design applying Matlab. − Boston: McGraw-Hill, 2001. – 530 p.

Ivanov-Smolenskii A.V. Electric machines: Textbook for higher educational institutions. – Moskva: Energiia, 1980. – 928 p. (Rus)

Kostenko M.P., Piotrovskii L.N. Electric machines, part 1. – Leningrad: Energiia, 1964. – 548 p.; part 2. – Leningrad: Energiia, 1965. – 704 p. (Rus)

Mathcad. Users Guide. Mathcad 2000 Professional. – MathSoft, Inc.: 101 Main Street, Cambridge, Massachusetts 02142, USA. – 335 p.

Prus V., Nikitina A., Zagirnyak M., Miljavec D. Research of energy processes in circuits containing iron in saturation condition // Przeglad Elektrotechniczny (Electrical Revue). − 2011. − No 3. − Pp. 149–152.

Prus V.V., Zagirnyak M.V., Kolotylo I.A., Miljavec D. Estimate and taking into account change of steel losses in induction motors in process of their aging // Proceedings of International IEEE Conference EUROCON 2009. – Saint Petersburg, Russia, 2009. – Pp. 790–795.

Prus V.V., Zagirnyak M.V., Nikitina A.V. // Grounds for efficiency and prospect of the use of instantaneous power components in electric systems diagnostics // Przeglad Elektrotechniczny (Electrical Revue). − 2006. − No 12. – Pp. 123–125.

Zidaric B., Zagirnyak M., Lenasi K., Miljavec D. Hysteresis losses in soft magnetic composite materials // COMPEL: Journal for Computation and Mathematics in Electrical and Electronic Engineering. − 2006. − Vol. 25. – The International No 1. – Pp. 157–168.

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Copyright (c) 2022 Tekhnichna Elektrodynamika

Abstract views: 117 | PDF Downloads: 21

Downloads

Download data is not yet available.