ANALYTICAL NONLINEAR-PROBABILISTIC MODEL OF THE EQUIVALENT ELECTRICAL RESISTANCE OF A LAYER OF METAL GRANULES
ARTICLE_1_PDF (Українська)

Keywords

resistance distribution
nonlinear-probabilistic model
discharge current
spark-erosion treatment
layer of metal granules розподіл опору
нелінійно-імовірнісна модель
розрядний струм
іскроерозійна обробка
шар металевих гранул

How to Cite

[1]
Shydlovska, N. and Zakharchenko, S. 2021. ANALYTICAL NONLINEAR-PROBABILISTIC MODEL OF THE EQUIVALENT ELECTRICAL RESISTANCE OF A LAYER OF METAL GRANULES. Tekhnichna Elektrodynamika. 5 (Aug. 2021), 003. DOI:https://doi.org/10.15407/techned2021.05.003.

Abstract

As a result of processing the experimental data, an analytical continuous nonlinear-probabilistic model of the equivalent electrical resistance of a layer of metal granules in the working liquid was created. It is described by four equations: the modified Gaussian distribution and the dependences on the instantaneous values of the discharge current in the layer of metal granules of the mathematical expectation, dispersion and correction coefficient of the range of its equivalent electrical resistance. Based on the form of the dependences obtained during the experiments and the physics of the processes that occur in this case, two main groups of analytical functions are considered that approximate the obtained dependences. Criteria and methods for finding the optimal values of their coefficients are described. The adequacy of the approximation of each of the three obtained dependences by several analytical functions was investigated, the optimal values of the coefficients of which were found by the described method. Analytical functions was compared, which approximate the dependence of the mathematical expectation of the equivalent electrical resistance of a layer of metal granules on the instantaneous values of the discharge current in it with the known nonlinear models of the resistance of such a medium. References 33, figures 3, tables 3.

https://doi.org/10.15407/techned2021.05.003
ARTICLE_1_PDF (Українська)

References

Asanov U.A., Tsoj A.D., Shcherba A.A., Kazekin V.I. Electroerosive technology of interconnections and powders of metals. Frunze: Ilym, 1990. 256 p. (Rus)

Perekos A.E., Chernenko V.A., Bunayev S.A., Zalutskiy V.P., Ruzhitskaya T.V., Boitsov O.F., Kakazei G.N. Structure and Magnetic Properties of Highly Dispersed Ni-Mn-Ga Powders Prepared by Spark-Erosion. Journal of Applied Physics. 2012. Vol. 112. Pp. 093909-1 – 093909-7. DOI: https://doi.org/10.1063/1.4764017

Monastyrsky G. Nanoparticles formation mechanisms through the spark erosion of alloys in cryogenic liquids. Nanoscale Research Letters. 2015. Vol. 10: 503. Pp. 1–8. DOI: https://doi.org/10.1186/s11671-015-1212-9

Aur S., Egami T., Berkowitz A.E., Walter J.L. Atomic Structure of Amorphous Particles Produced by Spark Erosion. Physical Review B. 1982. Vol. 26. No 12. Pp. 6355–6361. DOI: https://doi.org/10.1103/PhysRevB.26.6355

Hong J.I., Parker F.T., Solomon V.C., Madras P., Smith D.J., Berkowitz A.E. Fabrication of spherical particles with mixed amorphous/crystalline nanostructured cores and insulating oxide shells. Journal of Materials Research. 2008. Vol. 23. Issue 06. Pp. 1758–1763. DOI: https://doi.org/10.1557/JMR.2008.0199

Wang W., Zhu F., Weng J., Xiao J., Lai W. Nanoparticle morphology in a granular Cu–Co alloy with giant magnetoresistance. Applied Physics Letters. 1998. Vol. 72. No 9. Pp. 1118–1120. DOI: https://doi.org/10.1063/1.120942

Berkowitz A.E., Hansen M.F., Parker F.T., Vecchio K.S., Spada F.E., Lavernia E.J., Rodriguez R. Amorphous soft magnetic particles produced by spark erosion. Journal of Magnetism and Magnetic Materials. 2003. Vol. 254–255. Pp. 1–6. DOI: https://doi.org/10.1016/S0304-8853(02)00932-0

Dvornik M.I. Nanostructured WC–Co particles produced by carbonization of spark eroded powder: Synthesis and characterization. International Journal of Refractory Metals & Hard Materials. 2010. Vol. 28. Issue 4. Pp. 523–528. DOI: https://doi.org/10.1016/j.ijrmhm.2010.02.011

Harrington T., McElfresh C., Vecchio K.S. Spark erosion as a high-throughput method for producing bimodal nanostructured 316L stainless steel powder. Powder Technology. 2018. Vol. 328. Pp. 156–166. DOI: https://doi.org/10.1016/j.powtec.2018.01.012

Berkowitz A.E., Walter J.L. Spark Erosion: A Method for Producing Rapidly Quenched Fine Powders. Journal of Materials Research. 1987. No 2. Pp. 277–288. DOI: https://doi.org/10.1557/JMR.1987.0277

Nadutov V.M., Perekos A.O., Kokorin V.V., Konoplyuk S.M., Efimova T.V., Zalutsky V.P. The effect of electrospark dispersion on the magnetic and electric transport properties of the Heusler alloy Cu-Mn-Al. Metallofizika i Noveishie Tekhnologii. 2014. Vol. 36. No 12. Pp. 1679–1694. (Rus)

Liu Y., Zhu K., Li X., Lin F., Li Y. Analysis of multi-scale Ni particles generated by ultrasonic aided electrical discharge erosion in pure water. Advanced Powder Technology. 2018. Vol. 29. Issue 4. Pp. 863–873. DOI: https://doi.org/10.1016/j.apt.2018.01.003

Shen B., Inoue A. Fabrication of large-size Fe-based glassy cores with good soft magnetic properties by spark plasma sintering. Journal of Materials Research. 2003. Vol. 18. No 9. Pp. 2115–2121. DOI: https://doi.org/10.1557/jmr.2003.0297

Danilenko N.B., Savel’ev G.G., Yavorovskii N.A., Khaskel’berg M.B., Yurmazova T.A., Shamanskii V.V. Water purification to remove As(V) by electropulse treatment of an active metallic charge. Russian Journal of Applied Chemistry. 2005. Vol. 78. No 10. Pp. 1631–1635.

Kornev Ia., Saprykin F., Lobanova G., Ushakov V., Preis S. Spark erosion in a metal spheres bed: Experimental study of the discharge stability and energy efficiency. Journal of Electrostatics. 2018. Vol. 96. Pp. 111–118. DOI: https://doi.org/10.1016/j.elstat.2018.10.008

Goncharuk V.V., Shcherba A.A., Zakharchenko S.N., Savluk O.S., Potapchenko N.G., Kosinova V.N. Disinfectant action of the volume electrospark discharges in water. Khimiia i tehnologiia vody. 1999. Vol. 21. No 3. Pp. 328 – 336. (Rus)

Shcherba A.A., Zakharchenko S.N., Lopatko K.G., Aftandilyants E.G. Application of volume electric spark dispersion for production steady to sedimentation hydrosols of biological active metals. Pratsi Instytutu Elektrodynamiky Natsionalnoi Akademii Nauk Ukrainy. 2009. Issue 22. Pp. 74–79. (Rus)

Lopatko K.G., Melnichuk M.D. Physics, synthesis and biological functionality of nanosize objects. Kyiv: Vidavnichij centr Natsionalnogo Universitetu Bioresursiv i Priridokoristuvannya Ukraini, 2013. 297 p. (Ukr)

Borisevich V.B., Kaplunenko V.G., Kosinov N.V., Borisevich B.V. Nanomaterials and nanotechnology in veterinary practice. Kyiv: Avitsena, 2012. 512 p.

Shcherba A.A., Podoltsev A.D., Kucheryavaya I.N. Mathematical modeling of electrothermal processes at spark processing of contacting current conducting granules. Proc. of the 3rd International scientific and technical conference Unconventional electromechanical and electrical systems. Szczecin, Poland. 1997. Vol. 1. Pp. 139–147

Shydlovskyi A.K., Shcherba A.A., Suprunovska N.I. Power Processes in Electrical Pulse Devices with Capacitive Energy Storages. Kyiv: Interkontinental-Ukraina, 2009. 208 p. (Rus)

Shcherba A.A., Podoltsev A.D., Zakharchenko S.N. Regulation of dynamic parameters of technological systems of volume electrospark treatment heterogeneous current-carrying media. Pratsi Instytutu Elektrodynamiky Natsionalnoi Akademii Nauk Ukrayiny: Elektrotekhnika. 2001. Pp. 3–16. (Rus)

Zakharchenko S.N. Modelling of Dependence of Electrical Resistance of Granulated Current-carrying Mediums from a Pulse Current Proceeding in them. Tekhnichna Elektrodynamika. 2012. No 5. Pp. 17–27. (Rus)

Suprunovska N.I. Modeling and Transient Analysis in Electric Circuits of Semiconductor Electro-discharge Installations with Nonlinear Electro-Spark Load. Energy saving. Power engineering. Energy audit. 2014. No 9 (128) Special issue Vol. 1: Power electronics and energy efficiency. Pp. 34–44. (Rus)

Shydlovska N.A., Zakharchenko S.M., Cherkaskyi O.P. Physical Prerequisites of Construction of Mathematical Models of Electric Resistance of Plasma-erosive Loads. Tekhnichna Electrodynamika. 2017. No 2. Pp. 5–12. (Ukr) DOI: https://doi.org/10.15407/techned2017.02.005

Zakharchenko S.M. Physical Model of the Granulated Current-carrying Medium. Tekhnichna Elektrodynamika. 2012. No 6. Pp. 19–26. (Rus)

Shydlovska N.A., Zakharchenko S.M., Cherkaskyi O.P. Parametric Model of Resistance of Plasma-erosive Load, Adequate in the Wide Range of Change of Applied Voltage. Tekhnichna Elektrodynamika. 2017. No 3. Pp. 3–12. (Ukr) DOI: https://doi.org/10.15407/techned2017.03.003

Zakharchenko S.M. Statistical Research of Equivalent Electric Resistance of the Heterogeneous Current-carrying Medium at its Electroerosive Processing on an Example of Granules of Aluminum in Water. Naukovyi Vіsnyk Natsіonalnoho hіrnychoho unіversytetu. 2013. No 1 (133). Pp. 62–67. (Ukr)

Ivashchenko D.S., Shcherba A.A., Suprunovska N.I. Analyzing Probabilistic Properties of Electrical Characteristics in the Circuits Containing Stochastic Load. IEEE International Conference on Intelligent Energy and Power Systems IEPS-2016. Kyiv, Ukraine, June 7–11, 2016. Pp. 45–48.

Shydlovska N.A., Zakharchenko S.M. Discrete Nonlinear-Probabilistic Model of the Equivalent Electrical Resistance of a Layer of Metal Granules. Tekhnichna Elektrodynamika. 2021. No 2. Pp. 3–12. (Ukr). DOI: https://doi.org/10.15407/techned2021.02.003

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Copyright (c) 2021 Tekhnichna Elektrodynamika

Abstract views: 1314 | PDF Downloads: 578

Downloads

Download data is not yet available.