Abstract
A mathematical model and a method for calculating the parameters of an electromagnetic system with spatially orthogonal magnetic fields, which are created by the currents of two windings, one of which is made in the form of a cylindrical inductor, and the second in the form of a saddle-shaped coil with linear sections directed along the generatrix of the inductor, are developed. The average volume densities of electromagnetic forces causing the melt motion during induction heating in crucible furnaces or continuous casting machines of steel billets are determined. It was established that at the level of large radial velocities insignificant velocity inhomogeneities take place, which together with the azimuthal velocity leads to the appearance of velocity vortices and contributes to additional mixing of the metal. The windings supply voltage of the considered electromagnetic device is determined, which ensures the stirring of liquid metal at the final stage of the continuously cast ingot production. References 9, figures 3.
References
Dubodelov V.I., Smirnov A.N., Efimova V.G., Kravchenko A.V., Verzilov A.P. Hydrodynamic and physicochemical processes in intermediate ladle for continuous casting of steel. Kyiv: Naukova dumka, 2018. 262 p. (Rus)
Vishtak T.V., Kondratenko I.P., Raschepkin A.P. Electromagnetic crystalliser with spatially orthogonal magnetic fields. Pratsi Instytutu Elektrodynamiky Natsionalnoi Akademii Nauk Ukrainy. 2002. No 2(2). Pp. 33-39. (Rus)
Kovenya V.M., Chirkov D.V. Finite difference and finite volume methods for solving problems of mathematical physics. Novosibirsk: Novosibirsk State University, 2013. 87 p. (Rus)
Dautov R.Z., Karchevsky M.M. Introduction to the theory of finite element methods. Kazan: Kazan State University, 2004. 239 p. (Rus)
Zhiltsov A.V., Liktey V.V. Calculation of the magnetic field of a magnetoelectric machine with a smooth stator by a secondary source method. Tekhnichna Elektrodynamika. 2018. No 5. Pp. 7-10. (Ukr) DOI: https://doi.org/10.15407/techned2018.05.007
Kondratenko I., Zhiltsov A., Vasyuk V. Simulation of discharge capacity axle symmetric systems 'coil - Non-ferromagnetic massive disk' by the method of integral equations. 16th International Conference on Compu-tational Problems of Electrical Engineering, CPEE, Ukraine, Lviv, November, 2015. Pp. 71-73. (Eng)
Zhyltsov A.V. Two-dimensional integro-differential model for calculating eddy currents in the system mold – induction stirrer with a nonlinear massive magnetic core. Elektronnoe modelirovanie. 2007. No 6. Pp. 37-46. (Rus)
Neyman L.R., Demirchyan K.S. Theoretical foundations of electrical engineering. Vol. 2. Leningrad «Energiya», 1966. 407 p. (Rus)
Targ S.M. The main tasks of the theory of laminar flows. Publishing house of technical and theoretical literature, 1951. 420 p. (Rus)

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright (c) 2020 Array