Keywords
electromagnetic parameters
ferromagnetic screen
unipolar current pulse
transients електропластична обробка
електромагнітні параметри
феромагнітний екран
однополярний імпульс струму
перехідні процеси
How to Cite
Abstract
Pulsed currents and magnetic forces of an induction system with a spiral winding and a ferromagnetic shield for processing non-magnetic thin-sheet metal strips in order to create magnetoplastic, electroplastic effects due to eddy currents are studied. Under the strip there is the ferromagnetic shield, and above it – spiral winding. The aim of the work is to develop an analytical method for calculating transients of pulsed currents in an electric circuit with the induction system and a capacitor charged to certain voltage taking into account influence of the ferromagnetic shield to perform investigation of time-varying magnetic field. Electromagnetic parameters of the inductor are determined by computer simulation using the finite element method in the mode of harmonic currents. Current transients in the electric circuit are calculated using known in theoretical electrical engineering mathematical dependences and distribution of current density and magnetic forces in the strip is calculated by the finite element method in the mode of transients. Influence of the ferromagnetic shield on electromagnetic processes in the induction system for the set ranges of strip’s thickness, its electrical conductivity and current frequency is established. Electromagnetic force between the spiral winding and the strip, the current density in the strip, as well as the moments of time at which the current and force have maximum values are studied. References 14, figures 6, tables 2.
References
Vasiliev M.A. Features of plastic deformation of metals and alloys in a magnetic field. Overview. Advances in the physics of metals. 2007. Vol. 8. Pp. 65–105. (Rus) DOI: https://doi.org/10.15407/ufm.08.01.065
Lobanov L.M., Kondratenko I.P., Zhltsov A.V., Karlov O.M., Pashchyn M.O., Vasyuk V.V., Yashchuk V.A. Electrophysical unsteady processes in the system to reduce residual stresses welds. Tekhnichna Elektrodynamika. 2016. No 6. Pp. 10–19. DOI: https://doi.org/10.15407/techned2016.06.010 (Ukr)
Raschepkin A.P., Kondratenko I.P., Karlov A.N., Kryshchuk R.S. Magnetic forces and currents of the inductor for magnetic-pulse processing of welding joints of non-magnetic thin sheet metals. Tekhnychna Elektrodynamika. 2020. No 5. Pp.74–79. DOI: https://doi.org/10.15407/techned2020.05.074 (Ukr)
Rashchepkin A.P., Kondratenko I.P., Karlov A.N., Kryshchuk R.S. Electromagnetic field of w-shaped inductor for magnetic-pulse processing of materials. Tekhnychna Elektrodynamika. 2019. No 6. Pp. 5–12. DOI: https://doi.org/10.15407/techned2019.06.005 (Ukr)
Lobanov L.M., Pashchyn M.O., Mykhodui O.L., Sydorenko Yu.M. Effect of the Indenting Electrode Impact on the Stress-Strain State of an AMg6 Alloy on Electrodynamic Treatment. Strength of Materials. 2017. Vol. 49. Issue 3. Pp. 369–380. DOI: https://doi.org/10.1007/s11223-017-9877-1
Stepanov G., Babutski A., Mameev I., Pashchin N., Savitskii V., Tkachuk G. Redistribution of residual welding stresses in pulsed electromagnetic treatment. Strength of Materials. 2011. Vol. 43(3). Pp. 326–331. DOI: https://doi.org/10.1007/s11223-011-9300-2
Vasetsky Yu.M. Exact analytical and approximate asymptotic calculation methods to determine three-dimensional electromagnetic field near conducting body with flat surface. Tekhnichna Elektrodynamika. 2021. No 4. Pp. 3–13. DOI: https://doi.org/10.15407/techned2021.04.003
Kryshchuk R.S. Influence of winding ends on the parameters of pulse inductor with U-shaped core. Tekhnichna Elektrodynamika. 2020. No 6. Pp. 69–76. DOI: https://doi.org/10.15407/techned2020.06.069
Coles L.A., Roy A., Silberschmidt V.V., Novac B.M., Alotaibi T., Senior P., Smith I.R. Analysis of pulsed electroplasticity in metals. IEEE 21st International Conference on Pulsed Power (PPC). Brighton, UK, June 18-22, 2017. DOI: https://doi.org/10.1109/PPC.2017.8291317
Andre D., Burlet T., Körkemeyer F., Gerstein G., Gibson J.S.K.-L., Sandlöbes-Hauta S., Korte-Kerzel S. Investigation of the electroplastic effect using nanoindentation Materials & Design. 2019. Vol. 183. 108153. DOI: https://doi.org/10.1016/j.matdes.2019.108153
Troitsky O.A., Stashenko V.I. Advantages of drawing and rolling metals with pulse current IOP Conf. Series: Materials Science and Engineering. 2020. 012084 DOI: https://doi.org/10.1088/1757-899X/848/1/012084
Gorodzha K.A., Podoltsev A.D., Troshchynckyi B.O. Electromagnetic processes in pulsed electrodynamic emitter to excite elastic vibrations in concrete structures. Tekhnichna Elektrodynamika. 2019. No 3. Pp. 23–28. DOI: https://doi.org/10.15407/techned2019.03.023 (Ukr)
Postnikov I.M. Designing of electrical machines. Kiev: HTI, 1962. 736 p. (Rus)
Neiman L.R., Kalantarov P.L. Theoretical Foundations of Electrical Engineering. Part 2. Moskva-Leninhrad: SEI, 1959. 444p. (Rus)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright (c) 2022 Tekhnichna Elektrodynamika