Abstract
The problem of voltage changer design that will maintain two types of transformation simultaneously (purposeful change of the voltage level and its stabilization at this level) is reasonable to solve by means of transformer-andswitches executive structures. The overall (idealized) and practically reachable Input-Output characteristics of such changers are examined in the research paper. It was proved that in spite of discretely-one manner, a smooth setpoint of stabilized voltage level is possible. It was shown that in case of need the stabilization at each level may happen over its range that is much wider than normalized range for all the levels in whole. References 4, figure 1.
References
Lypkivskyi K.O. Duality of Transformer-and-Switches Executive Structures of Alternating Current Voltage Stabilizers and Regulators // Tekhnichna elektrodynamika. – 2010. – No 6. – P. 16–23. (Ukr)
Lipkovskii K.A. Influence of parameters of supply main on the performance of the executive body of
Alternating Voltage Discrete Stabilizer // Tekhnichna elektrodynamika. Tematychnyi vypusk "Problemy suchasnoi elektrotekhniky". – 2006. – Vol. 5. – P. 74–76. (Rus)
Lipkovskii K.O. Transformer-and-Switches Executive Structures of Alternating Current Voltage Converters. – Kiev: Naukova Dumka, 1983. – 216 p. (Rus)
Lipkovskii K.O., Lialko O.V., Biruk B.D., Uvarov D.B. Smooth Regulation of the Output Voltage in the Discrete Stabilizers based on TSES / Problemy preobrazovatelnoi tekhniki, part 4. – IED of AS of USSR, Kiev, 1987. – Pp. 133–135. (Rus)

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright (c) 2023 Array